The TSURUMI HS-pump is a small and robust submersible contractor's pump with a wide range of applications whereever water has to be moved.
Du er her:
- Start >
- Danmark >
- Entreprenører Pumper >
- HS
HS | 1-phase / 50Hz
Ydelseskurve
Specifikationer
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|---|---|---|---|---|
HS2.4S | 2" AG | 0,4 | 2,6 | 12,2 | 207 | 11,3 | 7 | 10 | 10 | |
HS2.75S | 2" AG | 0,75 | 4,8 | 18,0 | 230 | 19,0 | 7 | 10 | 10 | |
HS3.75S | 3" AG | 0,75 | 4,8 | 18,0 | 300 | 19,6 | 7 | 10 | 10 |
Materiale
ø Discharge bore mm | 50, 80 | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Spring water, Rain water, Ground water, Sand carrying water | |||
Pump | Compo- nents | Impeller | Semi-Vortex impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Urethane rubber | ||
Casing | Ductile iron casting EN-GJS-700-2 | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Motor Protector (built-in) | Miniature protector | |||
Insulation | Insulation class E | |||
Phase / Voltage | Single phase 230V / 110V / 50Hz | |||
Material | Casing | Aluminium die casting | ||
Shaft | Stainless steel EN-X6Cr13 | |||
Cable | Rubber, H07RN-F | |||
Discharge Connection | Threaded flange/Hose coupling |
Dimensions in mm:
-
-
- HS2.4S
- HS2.75S
- HS3.75S
W1: lowest running water level
Model | d | A | A1 | B | B1 | D | H | W1 |
---|---|---|---|---|---|---|---|---|
HS2.4S | 50 | 240 | 207 | 158 | 84 | 185 | 358 | 90 |
HS2.75S | 50 | 285 | 233 | 217 | 109 | 184 | 424 | 90 |
HS3.75S | 80 | 285 | 233 | 217 | 109 | 184 | 424 | 90 |
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website
www.tsurumi.eu/english/applications.htm.